Verificando o Cubo Traseiro da Bicicleta

Introduction

O cubo traseiro deve segurar a roda firmemente na bicicleta e também permitir que a roda gire.

Step 1

Is the rear hub loose enough? - Verificando o Cubo Traseiro da Bicicleta

Is the rear hub loose enough?

Lift the back end of the bike so the rear wheel is off the ground. Give the wheel a spin. The easiest way to do this is by gently pressing a pedal. It must turn smoothly without clicks or catches. If the bike has a freewheel that will make an even noise but the rear hub must be smooth. If there’s a problem with the brake open it to check the rear hub. Mudguards rubbing may be another source of distracting problems.

Step 2

Is the rear hub tight enough? - Verificando o Cubo Traseiro da Bicicleta

Is the rear hub tight enough?

Grab the rim and pull it sideways. There must be no discernible movement at the rear hub. If the wheel moves from side to side on the axle the bearing is too loose. This test also checks if the wheel axle is clamped tightly in the frame.