Introduction
Shimano Hollowtech cranks are quite common on modern road bikes, although other systems are regularly seen too. Shimano Hollowtech cranks are fairly simple to remove and fit, although a special tool is required to remove the cranks. When replacing the cranks, make sure they are securely fastened, as a damaged pair can be expensive to replace.
This is a long guide, so you can choose to either watch the entire video above, or follow it in smaller chunks by clicking on the individual steps below.
1. Remove A Shimano Hollowtech Crankset On A Bike
Shimano Hollowtech cranks have a hollow axle that is connected to the right-hand crank. They are simple to remove.
2. Fit A Shimano Hollowtech Crankset On A Bike
Shimano Hollowtech cranks have a hollow axle that is connected to the right-hand crank. They are simple to fit.
3. Check The Cranks On A Bike
Modern bikes usually have cranks made of aluminium, they are mounted on an axle made of harder material, usually steel. If there's any play between the cranks and the crank axle the soft aluminium will soon get worn to the point where it's impossible to lock the cranks. If the cranks are loose don't ride the bike.
Related Maintenance Tutorials
Replace The Chainring On A Shimano Hollowtech Crankset On A Bike
Remove A Shimano Hollowtech Crankset On A Bike
Fit A Shimano Hollowtech Crankset On A Bike
Replace A Shimano Hollowtech Bottom Bracket On A Bike
Replace A Bike's Square Tapered Crankset
Fit A Shimano Hollowtech Bottom Bracket On A Bike
Remove A Shimano Hollowtech Bottom Bracket On A Bike
Replace A Bike Dropout
Replace A Bike Cassette
Replace A Bike Freewheel
Replace A Bike Pedal
Replace The Chainring On A Bike's Square Tapered Crankset