Look After A Bike’s Front Wheel Hub
If your front hub has a modern sealed bearing cartridge then it must be replaced, otherwise a cup and cone design can be serviced. Take extra care not to loose any of the balls as they fall out of the hub when you open it up. When buying new balls, take the old ones to your local bike shop so you can exchange them with like-for-like replacements.
This is a long guide, so you can choose to either watch the entire video above, or follow it in smaller chunks by clicking on the individual steps below.
Steps to Look After A Bike’s Front Wheel Hub:
There are two types of fixing for a front wheel. Hexagonal nuts threaded on a solid axle, or a quick release skewer system that runs through the centre of a hollow axle. If the wheel has a hub brake or a hub generator there are some extra steps.